Simple Notepad Speak Trick when you type anything on Computer

1. Open Notepad

2. Copy and Paste the following code on it

Dim message, sapi
message=InputBox("What do you want me to
say?","Speak to Me")
Set sapi=CreateObject("sapi.spvoice")
sapi.Speak message

3. Save the file as   speak.vbs

4. Finally open   speak.vbs   file and type something in it. It will speak out. Enjoy...

You like the Post?  Then Please Share it...

PC to PC free chat without any Softwares

1) All you need is your friend's IP Address and your Command Prompt.

2) Open Notepad and write this code as it is.....!

@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

3) Now save this as "Messenger.Bat".

4) Open Command Prompt.

5) Drag this file (.bat file) over to Command Prompt and press Enter.

6) Now, type the IP Address of the computer you want to contact and press enter

7) Now all you need to do is type your message
and press Enter.
Start Chatting.......!

You like the Post?  Then Please Share it...

PC errors and the solutions for them...

1. MONITOR LED IS BLINKING
Check all the connections like Monitor Cable, Data
cables,RAM, Display Card , CPU connections.

2. CONTINUOS THREE BEEPS
Problem in RAM Connection.

3. THREE BEEPS ( 1 Long 2 Short)
Problem in Display Card Connection

4. THREE LONG BEEPS PERIOD WISE
Problem in BIOS or RAM (Basic Input Output
System)

5. CONTINUOS NON-STOP BEEPING
Key Board Problem (I.e.; Some Key is pressed for
Longer time)

6. FDD LED IS GLOWING CONTINUOSLY
Data cable to be connected properly (twisted
cable).

7. NO DISPLAY ON THE SCREEN AT ALL
Hard Disk cable connected wrongly. Connect rightly
seeing the Red mark (Faces power supply) and
then
Restart.

8. POWER LED IS OFF
a. Check main power cord
b. Check S.M.P.S.
c. Check Mother Board connection

9. SHOWING CMOS ERROR
Replace 3 Volt battery of Mother Board . Set
Original
Settings Manually.(Refer CMOS Setup chart)
Enter your search termsSubmit search form

10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
Check Power cord of FDD , Data Cables , set CMOS
&
Finally the Check drive.

11. SHOWING HDD ERROR OR HARD DISK FAILURE
a. Check Power Cord
b. Check connection of HDD
c. Check Data cable
d. Check Hard Disk parameters in CMOS or Auto
detecting Setting Partitions by Fdisk Command,
then
format it to set track 0.

12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY
a. Check S.M.P.S
b. RAM not functioning properly.
c. Software problem (due to using pirated software)
d. CPU fan not functioning properly.

13. DANCING SCREEN
a. Check Display card connection
b. Virus Problem
c. Video Memory Problem

14. SHAKING SCREEN
a. Earthing problem
b. Magnetic waves comes around.

15. CPU CABINET SHOCK
a. Check Earthing
b. Check main power cord.

16. NON-SYSTEM DISK ERROR
a. Floppy Drive having different disk (Non-Bootable
Disk) OR CMOS Parameters for Hard Disk may not
be
set properly.
b. Hard Disk Partitions may not be created.
c. Hard Disk may not be formatted.

17. MISSING OPERATING SYSTEM
The System files missing namely Ie;
command.com} -
User File IO.SYS & MS_DOS.SYS } - Hidden Files.
These
above three files required for Start up of the system
that can be transferred by using SYS C: Command
OR
While the time of formatting by using Format c:/u/s

18. MISSING COMMAND INTERPRETOR
May the file Command.com is corrupted OR
Infected
by Virus OR Some one has Erased it.

19. SHOWING I/O ERROR
a. The type of Hard Disk in CMOS may not be set
properly.
b. Operating system used for formatting is not valid

20. SHOWING DIVIDE OVER- FLOW MESSAGE
a. May some Directories or Files crash with other
files.
b. Use CHKDSK/F or SCANDISK Command to
correct it.

21. HARD DISK MAKING NOISE WHILE PROCESSING
a. Unstabilized power supply.
b. Check for Loose Contact.
c. Do not use Y Connectors for Hard Disk.
d. It may create Bad Sector OR Weak Hard Disk.

22. HARD DISK HANGS WHILE PROCESSING
Check for Bad Sector by using CHKDSK or
SCANDISK
Command. If found format the Hard Disk and set
Partition before that area.(This is the only
procedure
to use Hard Disk with Bad Sector) OR (To avoid
Bad
Sectors use Standard Power Supply)

23. HARD DISK NOT DETECTED
a. Check Power Connector
b. Check Data Cables
c. Check Jumpers

24. PARTITION NOT SHOWN
Operating System where the Hard Disk formatted is
not supported with present Mother Board. For Eg:
Hard Disk formatted with Pentium System will hide
their partitions for 486 System.

25. MMX/DLL FILE MISSING
May the above files may be corrupted due to power
failure or Virus. Make available above files from
other
Computer. OR Reinstall Windows 98 Operating
System. (This procedure will not make any effect
on
existing Data).

26. WINDOWS REGISTRY ERROR
This will happen due to sudden ON/OFF of the
system. Final solution is to Reinstall Operating
System.

27. DISPLAY COLOUR DOES NOT MATCH
a. Configure Display Card properly with their CD.
b. The Standard setting for Windows is set it to
800x600 for better performance.

28. UNKNOWN DEVICE FOUND
May the Driver utility is not provided with operating
system . Insert Driver CD and install software for
the
above Device...

You like the Post?  Then Please Share it...

8 ways to access blocked Websites

1. Using IP instead of URL

2. Redirection with short URL service

3. Google cache

Search engines like Google and Yahoo cache webpages and these cached pages are stored in
search engines themselves, which likely will be added to the blocked list. Click on the ‘cache’ will
bring you to a cache version of the page, as updated as how Google caches it.

4. Internet Archive – Wayback Machine

Wayback Machine is a internet service that periodically keeps a copy of almost all websites in
the Internet way from the date they’re started. Clicking on the latest copy of what Wayback Machine have should be somewhat similar to the real site.

5. Anonymous surfing
- Hidemyass.com
- anonymizer.com
- wujie.net
- ultrareach.net

6. Use Proxy in Browsers

7. Bypass with translation services

Use Google translate. Open Google translate ,type the URL and translate page.

8. Retrieve web pages via Email

Web2Mail is a free service that sends websites you want to read right into your inbox. All you need to
do is send an email to www@web2mail.com with the URL as subject title.

You like the Post?  Then Please Share it...

Backup Facebook Photos, Videos, and Text

Facebook offers all its users the ability to backup
their photos, videos, and text.

> Click Account and go to Account Settings.

> Click the "Download a copy" of your Facebook data.

> Click the "START MY ARCHIVE" button.

> Then will ask you to enter your password.

> You will then be prompted with a message indicating that it will take some time to collect all your information.

Once that information is ready for download you'll be sent an e-mail with a link to a compressed .zip
file containing all your personal information.

You like the Post?  Then Please Share it...

Important Portals & their Founders

1. Google— Larry Page & Sergey Brin
2. Facebook— Mark Zuckerberg
3. Yahoo— David Filo & Jerry Yang
4. Twitter— Jack Dorsey & Dick Costolo
5. Internet— Tim Berners Lee
6. Linkdin— Reid Hoffman, Allen Blue & Koonstantin Guericke
7. Email— Shiva Ayyadurai
8. Gtalk— Richard Wah kan
9. Whats up— Laurel Kirtz
10. Hotmail— Sabeer Bhatia
11. Orkut— Buyukkokten
12. Wikipedia— Jimmy Wales
13. You tube— Steve Chen, Chad Hurley & JawedKarim
14. Rediffmail— Ajit Balakrishnan
15. Nimbuzz— Martin Smink & Evert Jaap Lugt
16. Myspace— Chris Dewolfe & Tom Anderson
17. Ibibo— Ashish Kashyap
18. OLX— Alec Oxenford & Fabrice Grinda
19. Skype— Niklas Zennstrom,Janus Friis & Reid Hoffman
20. Opera— Jon Stephenson von Tetzchner & Geir lvarsoy
21. Mozilla Firefox— Dave Hyatt & Blake Ross
22. Blogger— Evan Willams

You like the Post?  Then Please Share it...

Use Or Surf Internet Without Any Browser

Ever find yourself sitting in front
of a computer where Internet
Explorer or Firefox was blocked
by IT Administrator, and restricted
you from installing any software?
If that PC is running Windows
XP, then there is chance for you to
still surf Internet.

Just follow these simple steps:

1. Open Calculator, Start> Program
Files> Accessories> Calculator.

2. In Calculator, go to Help> Help
Topics.

3. Right click on the left hand side
of the title bar and click on 'Jump
to URL'.

4. Type in the URL and make sure
include the 'http://' at the
beginning.

You like the Post?  Then Please Share it...